Filter
Top Products
Page 16
The parking brake is designed to hold the mower from moving and is
not intended for use in stopping the mower while it is in motion.
.
TO SET PARKING BRAKE:
The hand operated parking brake is located at left hand side
of mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning radius).
Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.
CONTROLS
PARKING BRAKE:
CAUTION
Engage parking brake before starting engine