Filter
Top Products
Sonic Immersion System Dealer Installation Guide
Installing Power Supply in Equipment
Compartment
1. Turn the power supply so that you can see the Voltage
Selector Switch, see picture below, and place the switch in
the correct position (115V for UL and CSA spas or 240V for
CE spas) for your location.
2. Locate two #8 x ½” Pan head screws (P/N 01011-38) in the
power supply kit. The power supply has two holes for
attaching it to the wall of the equipment compartment, see
picture below. Locate the hole in the upper right corner of
the power supply. Use electric screwdriver to secure the
power supply. Now use the remaining screw to secure the
left bottom corner of the power supply.
27