Filter
Top Products
Sonic Immersion System Dealer Installation Guide
4. Apply a small amount of fish tape lubricant to a cloth and
then run the cables through the rag to give them a light
coating of lubricant.
5. Now pull them through the conduit from the equipment
compartment to the sub-woofer compartment.
6. Now that the harness and cables have been fished through
the conduit from the equipment compartment to the sub-
woofer compartment, the wires and cables can be connected
to the amplifier in the sub-woofer compartment. You may
want to trim off some of the harness because it could be
21