Filter
Top Products
22
ENG/MASTER 96
English
Español
Deutsch
Français
Italiano
Nederlands
<CRD3983A> 23
DIN Rear-mount
Installation using the screw holes on the
side of this product
1. Remove the side brackets.
2. Fastening this product to the fac-
tory radio-mounting bracket.
Position this product so that the brack-
ets screw holes and its screw holes are
aligned (are fitted), and tighten the
screws at 3 or 4 locations on each side.
Use either the binding screws (5 × 6
mm) or flush surface screws (5 × 6
mm), depending on the shape of the
bracket’s screw holes.
3. Attach the frame if applicable.
When attaching the frame, attach it
with the grooved side pointing down-
wards.
Screw for fixing the side bracket (5 × 6 mm)
Factory radio mounting bracket
Binding screw or
flush surface screw
Be sure to use the
screws supplied
with this product.
Dashboard or console
If the pawl
gets in the
way, bend it
down
Attach the frame with
this part facing down-
wards.