Filter
Top Products
9- ENG
D26968
ASSEMBLE WHEEL KIT
Tools needed:
2 - 2x4 at least 30” long
1 - 1/2” socket
1 - 1/2” open end wrench
1 - hammer
1 - pliers
Parts bag contains:
2 - Handle Grips
2 - Handle End Caps
4 - Screws, .313-18X1.75
1 - Cotter Pin
2 - Washers, 5/8" X 1.32 X .09
1 - Flat Steel Washer
2 - Axle Spacer
2 - Cap Screw 5/16-18 X 3/4
6 - Flange Nuts
2 - Wheel Brackets
1 - 5/8” Axle Cap
1. Lift the gas tank end of generator
and slide 2x4 between generator
and pallet as shown.
The generator is too
heavy to be lifted by
one person. Obtain assistance from
others before lifting.
2. Place handle grips on handle assemblies.
3. Place one 5/8” washer into the bottom of
each end cap. Push end caps onto the
end of the handle assemblies.
2x4
Gas Tank
Handle Grip
End Cap
5/8” Washer
Handle
Assembly