Filter
Top Products
6 — ENG
D20249
Handle
Engine Frame and
Wheel Assembly
Spray Gun
Quick Connect Wand
Nozzle Cleaning Kit
Quick Connect Nozzles
English
Owner's
Manual
Engine
Manual
Bagged Handle
High Pressure Hose
Bagged Parts
30 Weight
EngineOil
CONTENTS OF CARTON
Chemical Hose
(attached to barb
fitting on pump)
Spanish
Owner's
Manual
Instructional
Video
Handle Knobs
UNPACKING
1. Open carton.
2. Remove plastic bag containing handle, nozzles,
and engine manual supplied by engine manufac-
turer.
3. Remove cardboard from top of unit and inner
cardboard from around unit.
4. Remove plastic bag containing two knobs, nozzle
cleaning kit, instructional video, English Owner's
Manual, and Spanish Owner's Manual from carton.
5. Remove spray gun, quick connect wand, and
bottle of engine oil from carton.
6. Using box cutting tool, cut the four corners of the
shipping carton from top to bottom, then lay
panels flat. NOTE: Be careful not to cut into
chemical hose and high pressure hose.
7. Insert handle ends into pressure washer frame as
shown.
8. Install two knobs as shown and tighten securely.
9. Grasp handle and roll unit off of carton.
10. Remove high pressure hose from carton and store
in gun/hose holder as shown in Pressure Washer
Basics section in this manual.
Knobs