Filter
Top Products
Section 7— Service
Deck Removal
Remove the mower deck from the tractor as follows:
the engine, and set the parking brake.
2. Place the deck lift pedal in the lowest mowing position and
replace the lock pin in front of pedal in the deck height
Lowest
Mowing
Position
Highest
Mowing
Position
Lock Rod
Figure 7-3
Using a ⁄
towards the back of the tractor and slide the belt off the
Idler
Assembly
Idler Pulley
Bracket
Z-Force S60 &
Z-Force S54
Z-Force S48
Figure 7-4
4. Pull the cotter pins out of the four deck lift adjustment
brackets. See Fig. 7-5.
Cotter
Pin
Figure 7-5
CAUTION: The deck lift helper springs will cause
the deck lift pedal to slam to the highest position if
the click pin is not in front of the pedal.
5. Slide the links off the pins.
NOTE: It may be easier to place the deck lift pedal in
the transport position when sliding the deck out from
underneath the tractor.
6.
7. Slide the deck out from underneath the tractor to the right
side.
26