Filter
Top Products
11
IMPORTANT:
This unit is shipped with oil in the engine.
After assembly, see OPERATION section of this
manual for fuel and engine oil details.
NOTE: Reference to right and left hand side of the
mower is observed from the operating position.
This pedestrian controlled wide area mower has been
completely assembled at the factory.
LOOSE PARTS IN CARTON
The following items are packaged in a bag:
Operator’s Manual and Engine Manual
TOOLS NEEDED FOR ASSEMBLY
A tire Gauge
REMOVING THE UNIT FROM THE CRATE
1. Cut straps securing unit to pallet.
2. Remove any protective packaging and plastic tie
straps.
REMOVING THE CHUTE STRAP
1. Locate the chute strap which secures the discharge
chute in a vertical position.
2. Pull chute back towards the engine. While holding
the chute with one hand, cut the strap with the other
hand.
FINAL ADJUSTMENTS
Tire Pressure
The recommended operating rear tire pressure is 10-
12 psi. The caster wheels are semi-pneumatic and do
not require air pressure. Check the tire pressure
periodically and maintain equal pressure in both rear
tires at all times.
IMPORTANT: Refer to the tire sidewall for exact tire
manufacturer;s recommended or maximum psi. Do not
overinflate. Uneven tire pressure could cause the
cutting deck to mow unevenly.
ASSEMBLY