Filter
Top Products
23
MAINTENANCE SCHEDULE
Interval Item Service Service Log
Each Use 1. Mower Blades
2. Loose or missing hardware
3. Belts
4. Engine oil level
5. Fuel level
6. Controls
7. Cutter Blade Spindle Bearings
1. As required
2. Tighten or replace
3. Check
4. Check
5. Check
6. Check for proper orientation
7. Lubricate
1st 5 hours 1. Engine oil 1. Change
40 hours 1. Engine oil
2. Air cleaner
3. Mower blades
4. Spark plug
5. Follow lubrication chart
1. Change
2. Clean or replace
3. Sharpen and balance
4. Clean, replace, re-gap
5. Lubricate
Before Storage 1. Fuel System 1. Run engine until it stops from
lack of fuel or add a gasoline
additive to the gas in the tank.
Follow the maintenance schedule given below. This chart describes
service guidelines only. Use the Service Log column to keep track of
completed maintenance tasks.
Before performing any type of maintenance/service,
disengage all controls and stop the engine. Wait until
all moving parts have come to a complete stop.
Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear
safety glasses during operation or while performing
any adjustments or repairs.
WARNING