Filter
Top Products
45
Figure 58
• Disconnect the fixed link from the RH lift arm by
removing the internal cotter pin and clevis pin.
Reinstall the clevis pin and internal cotter pin in
the fixed link to avoid their loss. See Figure 59.
Figure 59
• On each side of the tractor, flip the klik pin locking
ring upward and remove the klik pin from the
frame mounting plate pin. Slide the side brace
and deck lift arms from each frame mounting pin.
Reinstall the klik pins to avoid losing. Refer to
Figure 60.
Figure 60
• Roll the deck forward to disengage the deck
hanger rod from the slots of the deck front roller
bracket. Lift the deck hanger rod and slide out of
the slots in the front receiver brackets. See
Figure 61. Store the deck hanger rod assembly
with the deck to avoid misplacing it.
Figure 61
• Remove the internal cotter pins and clevis pins to
allow the rear deck wheels to pivot. See Figure
62.
INTERNAL
COTTER PIN
LH LIFT ARM
CLEVIS PIN
CHECK
CHAIN
INTERNAL
COTTER PIN
CLEVIS PIN
RH LIFT
FIXED LINK
ARM
LH FRAME
MTG. PLATE
SIDE
BRACE
KLIK PIN
LOCKING RING
DECK
LIFT
ARM
DECK ROLLER
BRACKET SLOTS
FRONT RECEIVER
DECK HANGER
ROD ASSEMBLY
BRACKET SLOTS