Filter
Top Products
6. Lower seat into operating position and
sit in seat.
7, Slide seat until a comfortable position
is reached which allows you to press
clutchlbrake pedal all the way down.
8. Get off seat without moving its adjusted
position.
9.. Raise seat and tighten adjustment knob
securely
d"-,-. _ Seat
Seat Pa ....
'"a, 4_' S h o
"_X"',-..,,_"M" _nl_
ulder
Flat Wa_..h_
Adjl Knob
NOTE: You may now roll your tractor off
the skid. Follow the appropriate instruction
below to remove the tractor from the skid
,_ WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR OFF SKID
(See Operation section for location
and function of controls)
I. Press lift lever plunger and raise attach-
ment lift lever to its highest position.
2_ Release pa[king brake by depressing
clutchlbrake pedal°
3. Place gearshift lever in neutral (N) po-
sition.
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor.
CHECK BATTERY
I, Lift seat pan to raised position.
NOTE: tfthis battery is put into service after
month and year indicated on label (label
located between terminals) charge battery
for minimum of one hour at 6-t0 amps, (See
"BATTERY" in Maintenance section of this
manual for charging instructions).
Seat
Label
Terminal
9