Filter
Top Products
SNOW CHUTE ASSEMBLY
1. Remove back carriage bolt (See Figure 4).
ASSEMBLY
Shipping Position
2. Tilt chute back into operating position (See Figure 5).
3. Replace carriage bolt from inside of chute.
4. Replace flatwasher and nylon locknut on outside of
flange.
5. Tighten carriage bolt securely.
NOTE: check all carriage bolts in flange for tightness.
DO NOT overtighten.
Remove Carriag_BBolt
Figure 4
t
Flange
Figure 5
F-OOIOO8J 8
NEED PARTS? VISIT HTTP://WWW.MANUALBUDDY.COM/PARTS
NEED PARTS? VISIT HTTP://WWW.MANUALBUDDY.COM/PARTS/