Craftsman 919.763010 Pressure Washer User Manual


 
Know Your High Pressure Washer
Read this Owner's Manual and Safety Rules before
operation of your High Pressure Washer Compare
this iltuetrationwith our pressure washer to familiarize
yourself with the location of various controls and
adjustments, Save this manual for future reference,
PUMP- Develops high pressure.
ENGINE OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjustthe
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine instarting
mode for recoil starter -- Stops running engine.
RECOIL STARTER- Used for starting the engine
manually.
SPRAY GUN ASSEMBLY- Controls the application of
water onto cleaning surface with trigger device.
PUMP OIL FILL- Port where pump oil is poured and
breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded
gasoline ispoured,
CHEMICAL INJECTION TUBE AND FILTER- Mixes
water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres-
sure hose.
CHOKE- Lever used for starting unit.
ON/OFF
SWITCH
CHEMICAL GAS CAP
BASKET
GUN WAND
ASSEMBLY
THROTTLE
I
%
HANDLE
CHEMICAL INJECTOR
TUBE & FILTER
HIGH PRESSURE
HOSE
PUMP
WATER INLET
CONNECTION
HIGH PRESSURE
OUTLET
CHEMICAL ADJUSTMENT
KNOB