Filter
Top Products
COOLING SYSTEM
Your engine is air cooled. For proper
engine performance and long life keep
your engine clean.
• Clean air screen frequently using a stiff-
bristled brush.
• Keep cylinderfins, levers, and linkage
free of dirtand chaff.
Housing
Muffler
MUFFLE R
Do not operate tillerwithout muffler.Do not
tamper with exhaustsystem. Damaged
mufflersor spark an'asterscould create a
fire hazard. Inspect periodicallyand re-
place if necessary. If your engine is
equipped with a spark arrester screen
assembly, remove every 50 hours for
cleaning and inspection.Replace if dam-
aged.
SPARK PLUG
Replace spark plugsat the beginningof
each tillingseason or after every 50 hours
of use, whichever comes first. Spark plug
type and gap setting is shown in =PROD-
UCT SPECIFICATIONS" on page 4 of this
manual.
TRANSMISSION
Your transmission is sealed and will only
require lubrication if serviced.
CLEANIN G
• Clean engine, wheels, finish, etc. of all
foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with automotive
type wax.
We do not recommend using a garden
hose to clean your unit unless the muffler,
air filter and carburetor are covered to
keep water out. Water in engine can result
in a shortened engine life.
A, CAUTION: Disconnect spark plug wire
from spark plug and place wire where it
cannot come into contact with plug.
TILLER
TO ADJUST HANDLE HEIGHT
Select handle height best suited for your
tilling conditions. Handle height will be dif-
ferent when tiller digs into soil.
• First loosen handle lock lever.(Do not
loosen too much or handle locks may
fall out.)
• Handle can be positioned at different
settings between =HIGH" and =LOW"
positions.
• Retighten handle lock lever securely
after adjusting.
Handle (Low) Position
Handle (High) Position
Handle Lock Lever
15