TRACTOR -- MODEL NUMBER 917.273062
CHASSIS AND ENCLOSURES
KEY PART KEY PART
NO. NO. DESCRIPTION NO. NO.
1 150253 Rail, Frame RH 52 STD541431
2 140506 Drawbar, Gt 56 154914
4 73800700 Nut, Lock Hex 7/16 Unc 58 137113
5 163976 Dash YTGT 2 Cy] 60 17490620
6 157882 Dash, Lower Vgt One Piece 63 19131614
7 17720408 Screw, Thd Cut 1/4-20 x 1/2 68 17490508
8 145166 Support, Battery 70 137159
14 161023X558 Hood Asm., PntYTGT 84 142992
15 160568 Lens Asm Headlight Bar 86 74760716
16 121794X Cover, Access 90
17 17060612 Screw 3/8-16 x .75 91 170755
18 160564X558 Grille 98 140503
19 19131312 Washer 13/32x13/16x12 Ga. 99 140871
20 STD523710 Bolt, Fin Hex 3/8-16 x 1 100 124236X
21 STD541437 Nut Crownlock 3/8-16 Unc 101 17490628
23 17060616 Screw 3/8-16 xl.5 102 STD624003
24 145243X558 Footrest, RH 103 142273
28 145244X558 Footrest, LH 106 138776
30 145052 Saddle, Hydro 122 161464
31 161419 Brace, Supt 1-pcVGT 130 164863
32 161327 Bracket, Pivot Chassis Lh 138
33 161326 Bracket, Pivot Chassis Rh 139 161330
34 142131 Bracket, Engine Support Rear 140 163806
35 19111116 Washer 11/32x11/16x16 Ga. 141 163805
36 STD522507 Bolt, Fin Hex 5/16-18 x 3/4 142 161897
37 167287X558 FenderPnt 144 161900
39 136961 Bracket, Axle Front 145 19131414
40 156111 Bracket, Support Axle/Engine 147 162967
42 STD533710 Bolt, Carriage 3/8-16 x 1 148 164655
43 136939 Bracket, Spnsn Front Lh 150 161237
44 136940 Bracket, Spnsn Front Rh
45 154913 Bracket Asm., Susp Chas.Rh
47 17490608 Screw ThdroL 3/8-16 x 1/2
50 152728 Bracket, Chassis Front
DESCRIPTION
Nut, Crownlock 5/16-18 Uric
Bracket Asm., Susp Chas. Lh
Bracket Asm., Fender
Screw ThdroL 3/8-16 x 1-1/4
Washer 13/32 x 1 x 14 Ga.
Screw Thdrol. 5/16-18 x 1/2
Guide, Belt Mid Span
Stop, Over Center Mower
Bolt Fin Hex 7/16-14 UNC x 1
STD551237 Washer, Lock Ext. Tooth 3/8
Rail, Frame Lh
Bracket Skid Chassis
Rod By Pass
Cap By Pass Rod
Screw Thdrol 3/8-16 x 1-3/4
Retainer, Spring
Lock, By Pass
Bolt 5/16-18 TT
Screw Hex Wshd 8-18 x 7/8
Screw Hwhd Hi-Lo #13-16x3/4
163975X428 Cup Holder
Bolt Shoulder 5/16-18 TT
MagnetYTGT
Striker Plate YTGT
Bracket Dash Rh
Bracket Dash Lh
Washer Flat 13/32x7/8x14 Ga.
Fastener Nut Pal
Extrusion Bumpers
Duct Heat Hood
NOTE: All component dimensions given in U. S.
inches 1 inch = 25.4 mm
41