Craftsman 917.273062 Lawn Mower User Manual


 
CHECKTIRE PRESSURE
The tires on your tractor were overinflated
at the factory for shipping purposes.
Correct tire pressure is important for best
cutting performance.
= Reduce tire pressure to PSI shown in
"PRODUCT SPECIFICATIONS" section
of this manual.
CHECK MOWER LEVELNESS
For best cutting results, mower should be
properly leveled. See "TO LEVEL
MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for
replacing motion, mower drive, and
mower blade drive belts in the Service
and Adjustments section of this manual.
Verify that the belts are routed correctly.
CHECK BRAKESYSTEM
After you learn how to operate your
tractor, check to see that the brake is
properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this manual.
,/'CHECKLIST
Before you operate and enjoy your new
tractor, we wish to assure that you receive
the best performance and satisfaction
from this Quality Product.
Please review the following checklist:
yAII assembly instructions have been
completed.
,/'No remaining loose parts in carton.
y Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps).
y//Seat is adjusted comfortably and
tightened securely.
yAll tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory).
y/Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results, (Tires must be properly inflated
for leveling).
y/Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
y/Check wiring. See that all connections
are still secure and wires are properly
clamped.
y/Before driving tractor, be sure free-
wheel control is in drive position.
While learning how to use your tractor,
pay extra attention to the following
important items:
y/ Engine oil is at proper level.
y/Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
y/Become familiar with all controls - their
location and function. Operate them
before you start the engine.
y Be sure brake system is in safe
operating condition.
,/" It is important to purge the transmission
before operating your tractor for the first
time. Follow proper starting and
transmission purging instructions (See
"TO START ENGINE" and "PURGE
TRANSMISSION" in the Operation
section of this manual).
12