Craftsman 79938 Blower User Manual


 
USING YOUR UNIT AS A VACUUM
Use your unitas a vacuum to pick up
dry material such as leaves, grass,
small twigs, and bitsof paper.
For best results during vacuum use,
operate your unitat high speed.
Move slowly back and forth over the
material as you vacuum, Avoid forc-
ingthe unitinto a pile of debris as
this can clog the unit.
Keep the vacuum tube about an inch
above the ground for best results.
NOTE: Ifthe unit becomes clogged,
stop the unitand disconnect the exten-
sion cord. Wait untilthe impeller has
completely stopped turning,then re-
move the vacuum tubes. Carefully
reach intothe vacuum opening and
clear out the clogged debris.
CLEANING THE COLLECTION
BAG
IMPORTANT: THE COLLECTION BAG
MUST BE PROPERLY EMPTIED.
CUSTOMER RESPONSIBILITIES
You must properly empty and main-
tain the collection bag to avoid dete-
rioration and obstructionof air flow.
Remove the collection bag from the
unit and empty after each use. Do
not store bag containing leaves,
grass, etc.
Wash the bag once a year. Remove
the bag from the blower and turn the
bag inside out. Wash the bag with a
water hose. AllOWthe bag to hang
and dry before you reuse the bag,
VacuumOperating
Position
CARE & MAINTENANCE TASK WHEN TO PERFORM
Check for Loose fasteners and parts Before each use
Check for damaged or worn parts Before each use
Clean unitand labels After each use
Clean Collection Bag Yearly
G EN ERAL RECOMME NDATIONS
The warranty on this unit does not cov-
er items that have been subjected to
operator abuse or negligence. To re-
osive fult value from the warranty, the
operator must maintain unitas instruct-
ed in this manual. Various adjustments
will need to be made periodically to
properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
Inlet Cover
Blower Tube
Nozzle
Vacuum Tubes
Collection Bag
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement ofdamaged/worn
parts to your Sears Service Center.
ON/OFFSwitch - Ensure switch func-
tions properly by moving the switch
to the Off position. Make sure motor
stops; then restart motor and contin-
ue.
AFTER EACH USE
CLEAN UNIT & LABELS
Clean the unitusing a damp cloth
with a mild detergent.
Wipe oft unit with a clean dry cloth.
YEARLY
CLEAN COLLECTION BAG
Remove the bag and empty after
each use. Do not store bag without
emptying the bag of all contents.
Wash the bag once a year by turning
inside out and washing with a water
hose, Be sure to let bag dry com-
pletely before re-using the unit.