Filter
Top Products
5
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
FIGURE 12 LEFT SIDE VIEW
STEP 12: (SEE FIGURE 12)
Only for 54" mower decks
• Assemble a frame bracket to the L.H. foot rest. Use
two 3/8" x 1-1/4" hex bolts, two 3/8" lock washers and
two spacers.
• Assemble a shoulder bolt (P) and a 3/8" anged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
3/8" LOCK
WASHER
FRAME
BRACKET
3/8" x 1-1/4"
HEX BOLT
SPACER
SPACER
SHOULDER
BOLT (P)
(snow thrower)
3/8" FLANGED NUT (BB)
(snow thrower)
FIGURE 13 RIGHT SIDE VIEW
STEP 13 (SEE FIGURE 13)
Only for 54" mower decks
• Assemble a frame bracket to the R.H. foot rest. Use
two 3/8" x 1" hex bolts and two 3/8" lock washers.
• Assemble a shoulder bolt (P) and a 3/8" anged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
5/16" NYLOCK
NUT (CC)
5/16" x 3/4"
HEX BOLT (E)
SUSPENSION
ARM
STEP 14: (SEE FIGURE 14)
• Attach the two suspension arms to the outside of the
clutch/idler assembly using two 5/16" x 3/4" hex bolts
(E) and 5/16" nylock nuts (CC) for each arm.
3/8" NYLOCK
NUT
3/8" x 1"
HEX BOLT
MOUNTING
BRACKET
STEP 15: (SEE FIGURE 15)
• Attach the two mounting brackets to the front of the
clutch/idler assembly using four 3/8" x 1" hex bolts
and 3/8" nylock nuts. Place the frame brackets on the
outside of the assembly frame.
FIGURE 14
FIGURE 15
3/8" LOCK
WASHER
FRAME
BRACKET
3/8" x 1"
HEX BOLT
SHOULDER
BOLT (P)
(snow thrower)
3/8" FLANGED NUT (BB)
(snow thrower)
ALL PARTS IN THE FOLLOWING INSTRUCTIONS
ARE SUPPLIED WITH THE SNOW THROWER EXCEPT
FOR THOSE PARTS SHOWN IN GRAY, WHICH ARE
SUPPLIED WITH THE KIT.
54" MOWER DECKS
54" MOWER DECKS