Filter
Top Products
4
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
FIGURE 8 RIGHT SIDE VIEW
STEP 8: (SEE FIGURE 8)
• Assemble a frame bracket to the R.H. foot rest. Use
two 3/8" x 1" hex bolts and two 3/8" lock washers.
• Assemble a shoulder bolt (P) and a 3/8" anged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
• Proceed to step #14 on page 6.
3/8" LOCK
WASHER
FRAME
BRACKET
3/8" x 1"
HEX BOLT
SHOULDER
BOLT (P)
(snow thrower)
3/8" FLANGED NUT (BB)
(snow thrower)
STEP 9: (SEE FIGURE 9)
Only for 54" mower decks
• Remove and store the mower stop bracket and bolt
from both sides of the tractor frame.
• Remove the two bolts from the bottom of the foot
rests on both sides of the tractor frame.
FIGURE 9 RIGHT SIDE VIEW
Steps #9 thru #13 for tractors with 54" mower decks.
REMOVEREMOVE
54" MOWER DECKS
FIGURE 10 RIGHT SIDE VIEW
STEP 10: (SEE FIGURE 10)
Only for 54" mower decks
• Assemble the 54" R.H. hanger bracket to the holes on
the right side of the tractor frame where the mower stop
bracket was removed. Fasten with two 3/8" x 1" hex
bolts, two 3/8" lock washers and one 3/8" nylock nut.
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
3/8" LOCK
WASHER
3/8" NYLOCK
NUT
R.H. HANGER
BRACKET (54")
3/8" x 1"
HEX BOLT
54" MOWER DECKS
FIGURE 11 LEFT SIDE VIEW
STEP 11: (SEE FIGURE 11)
Only for 54" mower decks
• Assemble the 54" L.H. hanger bracket to the holes
where the mower stop bracket was removed on the left
side of the tractor frame. Fasten with two 3/8" x 1" hex
bolts, two 3/8" lock washers and two 3/8" nylock nuts
3/8" LOCK
WASHER
L.H. HANGER
BRACKET (54")
3/8" x 1"
HEX BOLT
3/8" NYLOCK NUT
54" MOWER DECKS