• Cut the tiewraps on the high pressurehose and
connecthighpressurehose togun. Tightenby
hand.
• Place assembledspray gun on holder.
CHECKLIST
• Remove plastic cap and connecthighpressure
hose to pump. Tighten by hand. Before you operate your new high pressurewasher
__ _ _ please review the following checklist:
_/ _ All assembly instructionshave been completed.
The high pressure hose connections to the spray
'-- gun and to the pump are tightand secure.
b _ _ While learning how to use your high pressure
1 (_ washer, pay extra attentionto the following important
items:
• Attach nozzle extensionto spray gun.
• Engine oil is at proper level
Important: Any attempt to crank or startthe engine
before ithas been properly serviced withthe recom-
mended oil may resultin an engine failure. See Page
8 for instructionson adding oiland properoil specifi-
cations.
Important: The water supplyto your pressure wash-
er must be connected and tumed on priorto starting
your engine.
• Be sure gas tank is filled properlywith clean,
fresh, unleaded gasoline.
• Become familiar with all controls- their location
and function. Operate those controlsbefore start-
ingthe engine.
5
._
