Filter
Top Products
CARTON CONTENTS
The following parts are shippedloose with yourpressure
washer:.
* Main Unit -- pressurewasher with wheels,
guide handle.
• High Pressure Hose
• Manual Bag (whichincludesthe items listedbelow)
• Ov_er's Manual
* Nozzle Cleaner Kit
• Parts Box (which includesitems listedbelow)
• Spray Gun
• Wand Extensionwith Hi/Lo AdjustableNozzle.
• Wire Form
• MotorOil
• "O"-Ring Kit
Become familiar with each piece before assemblingthe
pressure washer. Check all contentsagainstthe illustra-
tion on Page 6. If any parts are missingor damaged, call
the PressureWasher Helplineat 1-800-222-3136.
TO REMOVE PRESSURE WASHER FROM
CARTON
Removeloose parts and parts box includedwith pres-
sure washer. The highpressure hose is packed in the
bottomof the carton on the guide handle end.
Remove the hose.
• Slice two comers at guide handle end of carton from
top to bottom so the panel can be folded downfiat,
then remove all packingmaterial.
• Raise guide handle, secure in place and'rollthe pres-
sure washer out the open end ofthe carton.
Loosen knobs
to raise handle
HOW TO SET UP YOUR PRESSURE WASHER
Forthe mostpart,yourCraftsmanHigh PressureWasher
has been assembledatthe faclonj. You must, however,
attachthe wire form,assemble the spray gun,and attach
thehigh pressurehose tothe pump and spraygurL
• While facingthe rear of the Pre_;sureWasher, insert
the wire supportwiththe longerarm positk)nedon the
left. Fromthis view the hook should resemblea =,r'.
• Cut_ wrapon chemicalinjecliontube.Removechami-
calinjectionfilter,threadchemicalinjectiontubethrough
thewireform andreinsertIilterintotube.
Tighten knobs
when handle is
straight.
• Check carton for additionalloose parts.
4