Open as PDF
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUR
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHER
o First,move engine RUN/STOP switchto"OFF" position
o Simply shutting OFF engine will not release pres-
sure in the system. Pullthe triggeron the spray wand
assembly to relieve the pressure in the hose_
NOTE: A small amount of water will squirt out when you
release the pressure.
Your high pressure washer comes equipped with an adjust-
able nozzle (Fig. 11). You can order a turbo nozzle (Fig
12). Attach either nozzle as shown in Fig 11 and HAND
TIGHTEN the plastic knob.
HOW TO USE ADJUSTABLE NOZZLE
WARNING: NEVER ADJUST SPRAY PATTERN I
'_ OF SPRAY NOZZLE TO ADJUST SPRAY PAT-
WHEN SPRAYING, NEVER PUT HANDS IN FRONT
ADJUSTABLE NOZZLE OPTIONAL TURBO NOZZLE
FIG. 11 FIG. 12
With the adjustable nozzle you can adjust the spray pattern
to be either high pressure or low pressure, You can also
adjust the spray so it is concentrated in a stream pattern or
expanded into a fan pattern. Use this nozzle to apply
o Push tile nozzle attachment forward when you wish to
adjust the spray to low pressure mode (Fig° 13). Push
the nozzle backward to achieve high pressure,
= Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream
You can also adjust the pressure by turning the pressure
control knob (Fig. 14) to the desired pressure setting.
Turning this knob all the way clockwise produces the high-
est pressure. Do not unscrew the pressure control valve
more than 3 turns. It will come off.
NOZZLE IN HIGH
PUSH NOZZLE FORWARD FOR
LOW PRESSURE MODE AND DE-
TWIST NOZZLE TO
TWIST NOZZLE TO NARROW