Craftsman 536881851 Snow Blower User Manual


 
CUSTOMER RESPONSIBIUTIES
SERVICERECORDS
Fillindatesasyou Before Every Every Every Every
completeregular Each 8 25 50
IO0
Each_
Before
service. Use Often Hours Hours Hours Hours Season Storage
Change Engine Oil _/
Check and Clean Spark
Plug "_
Cleanand Inspect
SparkArrestor _"
Check Fuel "_
AugerDriveBelt * _/
ii
Adjust after 2 to 4 hours of use,
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does
not cover items that have been subjected
to operator abuse or negligence. To re-
ceive full value from the warranty, the op-
erator must maintain the snow thrower as
instructed in this manual.
Some adjustments will need to be made
periodicallyto properly maintain your
snow thrower.
Maintenance, replacement, or repair of the
emission control devices and systems can
be performed by any non-road engine re-
pair establishment or individual. Regular
maintenance will improve the performance
and extend the life of the engine.
A ARNING: Do not strike the
flywheel with a hammer or a
hard opject, ff done, the fly-
wheel can shatter during operation.
Do not tamper with the governor
spring, links or other parts to in-
crease engine speed.
AFTER EACH USE
Run the machine to clear the auger
of snow.
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
Check for any loose or damaged
parts.
_ghten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning properly.
If any parts are worn or damaged,
replace immediately.
18