Filter
Top Products
ASS
r ,,,,...........,,, ,,,,,_ ...............i,.,,,.i................
TOOLS REQUIRED FOR ASSEMBLY
1 - 5/16 inch Wrench (or adjustable wrench)
2 _ 7/16 inch Wrenches (or adjustable wrenches)
1 - Regular Screwdriver
1 - Pair Scissors
1- Hammer
CAUTION: ALWAYS WEAR SAFETY
GLASSES OR EYE SHIELDS WHILE
ASSEMBLING TILLER/ MINI TILLER/
CULTIVATOR.
IH HI I iII,HI
Figure 1 shows the mini tiller/cultivator completely
assembled
Reference to the right and left hand side of the mini tiller/
cultivator is from the operator's position behind the unit
TO REMOVE MIN! TILLER/CULTIVA-
TOR FROM CARTON
O Remove the plastic parts bag from the carton
® Remove the handles from the carton,
@ Remove packing insert from carton that contains
depth stake/transport wheels assembly
@ Lift the tiller/mini tillerlcuitivator out of the carton and
place on a hard level surface
® Remove packing material from around tines
TO INSTALL THE HANDLE
ASSEMBLY
The lower handles have a short bend at the bottom end
and are flattened at the top to allow the upper handle to
be placed between the lower handles To assemble the
handles, do the following:
• Unwind the throttle control from around the engine
and straighten the cable. Be careful you do not kink
the cable.
® Remove two {ocknuts, four washers and two handle
mounting screws from the tine shield (see Fig 2)
LEFT
HANDLE
RIGHT _
THROITLE _ _
DEPTH _ __
FIG. 1
4 WASHERS
2 LOCKNUTS
TINESHIELDNt.'_/_ 2HANDLE
COVER... _Z'_ I!i_il.___ _ MOUNTING
=_- n ._.../ , SCREWS
FRONT VIEW
ii NIHI
FIG,. 2