Filter
Top Products
OPERATION
HOW TO USE THE INDEX LEVER
1. Stop the engine and disconnect the
spark plug wire from the spark plug.
2. Loosen the front wheel knob shown in
Figure 10. Slide the front wheel all the
way to the right side.
3. Securely tighten the front wheel knob.
NOTE: To prevent the blade from hit-
ting the wheel while trimming, make
sure the front wheel is set in the ex-
treme right position.
4. Disengage the index lever (see
Figure 11). Move the index lever to the
notch marked 90°.
5. Reconnect the spark plug wire to the
spark plug.
6. Start the engine.
7. Move the clutch lever to the desired trim-
ming height.
,_ WARNING: While the engine is
running, never leave the Edger.
Before you adjust the wheels or
change the blade position, always dis-
engage the cutting blade and stop the
engine.
Front Whee_
Index Lever
F_ntWheel
Knob
Figure 10
Figure 11
F-OOllO2M 12