Filter
Top Products
OPERATION
KNOW YOUR EDGER
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger. To familiarize yourself with the location of the controls, compare the illustrations with
your Edger. Save this manual for future reference.
ENGINE
Clutch Lever
Control Rod
Throttle
Control
Blade Guard
Primer Button
VIEW OF BLADE AREA
Adjustable Rear Wheel
Adjustable Front Wheel Blade
Index Lever
Figure 6
Throttle Control - Controls the engine
speed.
Primer Button - Injects fuel directly into
the carburetor for faster starts.
Clutch Lever - Use to start and stop the
blade and control the depth of cut.
Adjustable Rear Wheel - Right rear
wheel is adjustable to level the Edger when
edging along a curb (curb-hopping).
Adjustable Front Wheel - Front wheel
is adjustable from side-to-side for balance.
The front wheel can also be adjusted down
for curb-hopping.
Recoil Starter Handle i The engine is
equipped with an easy pull recoil starter.
Blade Guard - Use to prevent stones or
other material from being thrown at the oper-
ator.
Index Lever- Permits adjustment from
the edging (vertical) position to the trimming
(horizontal) position. To change position, pull
the index lever and rotate the quill assembly
to the desired angle or position.
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F_OO1102M
WARNING: Debris thrown from
the Edger can result in foreign
objects being thrown into the
eyes, which can cause severe eye dam-
age. Always wear safety glasses or eye
shields when operating the Edger.
10