Craftsman 486.242223 Lawn Sweeper User Manual


  Open as PDF
of 20
 
6
STEP 5: (SEE FIGURE 4)
• Attachthebrushassemblywiththeredbrushretainer
totheleftendofthebrushshaftusingtwohexbolts
(D)andnylocknuts(F).Thebrushretainermarked
withredinkmustbeplacedtothemiddle of the
sweeper.
• Turnawheeltorotatethebrushes.(Thewheels
drivethebrushesinonedirectiononly.)Theoverlap
bristlesshouldbeonthebacksideofthebrushasit
rotates.
FIGURE 4
STEP 6: (SEE FIGURES 5 AND 6)
• Thehitchtubesarestampedwitha"77L"forthe
lefttubeanda"76R"fortherighttube.Thesweeper
housingismarkedwithan"L"ontheleftwithside
andan"R"ontherightside.
• Holdthelefthitchtubeagainsttheleftsideofthe
sweepersothatthe"77L"onthetubefacesaway
fromthesweeper.Attachthehitchtubeusingtwohex
bolts(C)andnylocknuts(G).Do not tighten yet.
HEX BOLT (C)
HITCH TUBE (L.H.)
NYLOCK NUT (G)
TUBE
MARKED
“77L”
HOUSING
MARKED “L”
FIGURE 5
FIGURE 6
HEX BOLT (C)
HITCH TUBE (R.H.)
NYLOCK NUT (G)
TUBE
MARKED
“76R”
HOUSING
MARKED “R”
STEP 7: (SEE FIGURE 6)
• Holdtherighthitchtubeagainsttherightsideofthe
sweepersothatthe"76R"onthetubefacestoward
thesweeper.Attachthehitchtubeusingtwohexbolts
(C)andnylocknuts(G).Do not tighten yet.
HEX BOLT (D)
NYLOCK NUT (F)
BRUSH RETAINER
MARKED RED
STEP 8: (SEE FIGURE 7)
• Fastenthehitchtubestogetherusingtwohexbolts
(A)andnylocknuts(G).Do not tighten yet.
HEX BOLT (A)
NYLOCK NUT (G)
FIGURE 7
 previous next