Filter
Top Products
TROUBLESHOOTING TABLE
_k WARNING: Always stop unit and disconnect from the power source before
performing all of the recommended remedies below except remedies that re-
quire the unit to be operating.
SYMPTOM CAUSE REMEDY
Unit fails to 1. Switch in the OFF position. 1. Slide switch to ON position,
operate, 2. Extension cord disconnected. 2. Reconnect extension cord.
3. Circuit breaker tripped, or 3. Reset circuit breaker or
fuse blown, fuse.
4. Mechanical failure. 4. Contact Sears Service (see back
cover).
Unit 1. Mechanical failure. 1. Contact Sears Service (see back
vibrates cover).
abnormally.
Impeller will 1. Debris in air intake area. 1. Clean unit. Remove any debris.
not turn 2. Mechanical failure. 2. Contact Sears Service (see back
freely, cover).
8