Craftsman 358.799341 Blower User Manual


 
KNOW YOUR ELECTRIC BLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT.Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF _ TopHandle
,o erTu e ozz,e
Cord _-=_ '/_-_
Retainer _=""_"_.
_"" Air Inlet
ON/OFF SWITCH
The ON/OFF SWITCH is used to
activate the motor.
BLOWER TUBE AND NOZZLE
The BLOWER TUBE and NOZZLE are
designed to direct the flow of air.
STOPPING YOUR UNIT
Slide the ON/OFF switch to the OFF
position to stop the unit.
STARTING YOUR UNIT
Slide the ON/OFF switch to the ON
position to turn on the unit.
_kWARNING: Do not use the unit
without the blower tubes properly at-
tached to avoid flying debris and/or im-
peller contact which can cause serious
in ury. Always wear eye protection to
prevent rocks or debr s from be ng
blown or ricocheting into the eyes and
face which can result in blindness or
serious injury.
OPERATING POSITION
BLOWER
_JbWARNING: Inspect the area be-
fore using the unit. Remove all debris
and hard objects such as rocks, glass,
wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage
during operation.
Use your unit as a blower for:
Sweeping debris or grass clippings
from driveways, sidewalks, patios, etc.
Blowing grass clippings, straw, or
leaves into piles, or removing debris
from corners, around joints, or be-
tween bricks.
Direct air flow by directing the blower
tube/nozzle down or to one side. Always
work away from solid objects such as
walks, large stones, vehicles, and
fences.
Clean corners by starting in corners and
moving outward. This will help prevent
an accumulation of debris which could
fly into your face.
Be careful when working near plants.
The force of the air could damage
tender plants.
6