Filter
Top Products
BLADE REPLACEMENT (Continued)
WARNING: Blades are sharp. When manually
slidingblade assembly, do not place your hand
or fingersbetween blades or in any position
where they couldget pinchedor cut,
• Replace blade screws. Tightenscrews securely.
• Replace blade cover screw. See Figure 16.
Note: Do net tighten untilbladecover hasbeen
replaced.
BLADECOVER
REARTAB
BLADE
BLADE
SCREWS
Fig. 16
• Replace bladecover. Place rear tab insidehous-
ing, align front tabswith slotsin housing,then slide
bladecover back intoits correctposition.Sea
Figure 17.
FRONTTABS
BLADECOVER
SUDEBLADECOVER
BACKINTOPosmoN
• Tighten blade coverscrew securely.
Fig. 17
_1= WARNING: Makesure blade coveris replaced
beforeconnectingyour hedgetrimmerto power
supply.Failureto do sowill expose internalparts
whichcould cause an accident or electrical
shock resuttinginseriousinjury,
Note: If binding occursafter replacingblade
assembly,repeat the stepsabove for reassembly.
11