Filter
Top Products
DR
SCOUT
FIELD and BRUSH MOWER Safety & Operating Instructions 10
Starter
Handle
Chapter 4: Operating Your DR
SCOUT
FIELD and
BRUSH MOWER
This chapter covers the procedures for starting and stopping your new DR
SCOUT
FIELD and BRUSH MOWER and discusses basic operation features.
Before Starting the Engine
1. Check the oil level every time you use the machine. (See Figure 2 on page 9)
2. Check the gas level. (Figure 2)
Starting
1. Move the shift lever to N (Neutral) (Figure 3).
2. Move the throttle (Figure 4) to the RUN position.
3. Press the primer pump three times.
4. Turn the key (Figure 4) to START.
5. Grasp the recoil starter handle and slowly pull until
you feel resistance. Let the cord retract a little bit, then
pull the cord rapidly to start the engine. One or two
pulls usually starts the DR
®
SCOUT
™
FIELD and
BRUSH MOWER (Figure 4).
Figure 3
Figure 4
Shift
Lever
Shift
Lever
Throttle
Control
Key
Switch
Wheel
Clutch
Blade
Clutch
Operator
Presence
Control
Primer Pump