Filter
Top Products
DR
4 -Ton WOOD SPLITTER Safety & Operating Instructions 17
Chapter 5: Maintaining the DR 4 -Ton WOOD SPLITTER
Regular maintenance is the way to ensure the best performance and long life of your wood
splitter. Please refer to this manual for maintenance procedures.
Regular Maintenance Checklist before each use:
Clean the log ram and guides.
Check the Splitting Wedge for sharpness (page 19).
Check the general condition of the wood splitter, e.g.; nuts, bolts, welds etc.
Before each season:
Check the hydraulic fluid level (page 19). Use an AW32 hydraulic fluid for operation over
40°F and Dextron automatic transmission fluid for operation below 40°F.
WARNING! When performing any maintenance, you must first unplug the
w
ood splitter from the power source and make sure the
hydraulic system is depressurized and the fluid has cooled.
Read the "Safety Considerations" chapter of this manual before
performing any repairs or maintenance.
Important! Do not drain the hydraulic fluid. Just add enough to replenish the
lost volume.