Filter
Top Products
21
22
TLM TALON MEDIUM
ORDERING INFORMATION
SAMPLE NUMBER: TLM-400-MH-MT-3F-FG-BK-HS
VOLTAGE
5
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
6
MT=Multi-Tap
6
TT=Triple-Tap
6
5T=5-Tap
6,7
DISTRIBUTION
Horizontal Lamp
2F=Type II Formed
2S=Type II Segmented
3F=Type III Formed
3S=Type III Segmented
4F=Type IV Formed
4S=Type IV Segmented
5F=Type V Formed
5S=Type V Segmented
SL=Spill Light Eliminator
AF=Automotive Front Row
Vertical Lamp
3V=Type III Vertical
8
4V=Type IV Automotive Perimeter
8
AR=Area Round
8
AS=Area Square
8
LENS TYPE
FG=Flat Glass
SG=Sag Glass
COLOR
9
[add as suffix/
must specify]
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
PRODUCT
FAMILY
1
TLM=Talon
Site
Medium
LAMP TYPE
MH=Metal Halide
MP=Pulse Start
Metal Halide
HPS=High Pressure
Sodium
LAMP
WATTAGE
2
70=70W
100=100W
150=150W
175=175W
250=250W
320=320W
3, 4
350=350W
3, 4
400=400W
4
OPTIONS [add as suffix]
F=Single Fuse [120, 277 or 347V]
10
FF=Double Fuse [208, 240 or 480V]
10
Q=Quartz Restrike
11
EM=Quartz Restrike w/Delay [Also Strikes at Cold Start]
11
EM/SC=Quartz Emergency Separate Circuit
11
PT=Electrical Power Tray
P=Button Type Photocontrol [120, 208, 240 or 277V]
10
R=NEMA Twistlock Photocontrol Receptacle
HS=Internal House-side Shield
12
VS=Polycarbonate Vandal Shield
DD=Deep Door
WM=Wall Mount with 8" Arm
DM=Direct Mount for Round or Square Pole
DW=Direct Wall Mount
MS=External Mast Arm Adapter
HL=Hi/Low Dimming
13
L=Lamp Included
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
ACCESSORIES [order separately/replace XX with color designation]
OPTIONS +
ACCESSORIES
[See Below]
NOTES: 1 8" arm and round pole adapter included with fixture. 2 Standard with mogul-base socket for HPS and 175-400W MH. Standard with medium-base socket for 150W MH and below. 3 320/350W Pulse
Start Metal Halide lamps only. 4 Requires reduced envelope lamp. 5 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
6 Dual-Tap is 120/277V wired 277V. Multi-Tap is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V. 5-Tap is 120/208/240/277/480V wired 480V. 7 Available for
250-400W only. 8 Vertical lamp optics ship standard with deep door. 250-400W vertically lamped optics not available with flat glass. 9Custom and RAL color matching available upon request. Consult
Cooper Lighting Representative for further information. 10 Must specify voltage. 11 Quartz options not available with SL and AF optics. 12 House-side shield not available on 5S, 5F, AS, AR, and SL optics.
13 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming controls. 14 Specifications and dimensions subject to change without notice.
Lamp Type Wattage
Metal Halide
175, 250, 400W
High Pressure Sodium 70, 100, 150, 250, 400W
Pulse Start Metal Halide 70, 100, 150, 250, 320, 350, 400W
DIMENSIONS
WATTAGE TABLE
IP65 Rated
25° C Ambient Temperature
U.L. 1598 Listed
CSA Listed
ISO 9001
FCO [Full Cutoff] Flat Glass Only
CERTIFICATIONS
STANDARD COLORS
GM
Graphite Metallic
WH
White
DP
Dark Platinum
BZ
Bronze
BK
Black
AP
Grey
DRILLING PATTERNS
TYPE “M” WALL MOUNT
3/4" [20mm]
dia. hole
[2] 5/8" [16mm]
dia. holes
4 7/8" [124mm]
2 7/16" [124mm]
2 5/16"
[59mm]
12"
[305mm]
4 7/8"
[124mm]
9/16" [14mm]
Dia. Hole [4]
6 1/2"
[165mm]
8"
[203mm]
10 1/2"
[267mm]
11 7/8"
[302mm]
8"
[203mm]
1 3/4"
[45mm]
16 1/4" [412mm]
23 1/4" [590mm]
8"
[203mm]
Effective Projected Area
Recessed Door w/o Arm: 0.79
Deep Door w/o Arm: 1.02
8" Arm: 0.43
EPA
Approximate Net Weight
Recessed Door 47 lbs. [21.79 kgs.]
Deep Door 52 lbs. [23.63 kgs.]
SHIPPING DATA
OA/RA1016=NEMA Photocontrol [105-285V]
OA/RA1027=NEMA Photocontrol [480V]
OA/RA1201=NEMA Photocontrol [347V]
OA/RA1013=Shorting Cap
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1213-XX=External House-side Shield Kit [EPA=0.38]