Filter
Top Products
15
16
OPTIONS + ACCESSORIES
ARM MOUNT
Standard 8" [TLM] or 10 1/2" [TLL]
extruded aluminum arm features internal
bolt guides for twin support rods. Round
pole mounting accommodated by utilizing
provided round pole adapter between the
fixture arm and pole shaft.
EXTERNAL MAST ARM ADAPTER [MS]
Cast aluminum mast arm adapter secures
fixture head to nominal 2" [2 3/8" O.D. pipe
size] horizontal steel tenon arm. Adapter
casting slip fits over tenon arm and is
secured via two [2] stainless steel bolts.
WALL MOUNT [WM]
Wall mount plate secured to wall via four [4]
lag bolts [lag bolts supplied by other]. Wall
mount kit includes 1/2" thick steel adapter
plate, a 8" [TLM] or 10 1/2" [TLL] machined
extruded aluminum arm and two [2] fixture
support rods.
TENON ADAPTER
Tenon adapters available to slip fit over poles
equipped with nominal 2" pipe size steel tenon
[2 3/8" O.D., 4" length] or nominal 3" pipe size
steel tenons [3 1/2" O.D., 5" length]. Adapter
secures to tenon via six [6] stainless steel
bolts. For complete configuration availability,
see Tenon Adapters on page 16.
POLYCARBONATE VANDAL SHIELD [VS]
Internally mounted 3/16" thick molded
polycarbonate lens, treated with UV inhibitor
to discourage the gradual discoloration that
results from exposure to sunlight and UV
radiating sources.
QUARTZ RESTRIKE [Q + EM + EM/SC]
Optional quartz restrike [Q] energizes auxiliary
quartz lamp upon power reactivation and
extinguishes once HID lamp re-ignites. Quartz
restrike with time delay [EM] adds cold start
activation. Emergency Separate Circuit [EM/SC]
allows the quartz lamp socket to be wired to
an independent relay controlled power source.
PHOTOCONTROL RECEPTACLE [R]
Fixtures available with gasketed photocontrol
receptacle for mounting a standard NEMA
photocontrol [ordered separately]. Medium
housing also available with a button-style
photocontrol [P].
INTERNAL HOUSE-SIDE SHIELD [HS]
Internal house-side shield reduces light
concentration behind the pole while
maintaining street side efficiency. Internal
house-side shields available on Type II, III, IV
and AF distributions.
EXTERNAL HOUSE-SIDE SHIELD
[MA1213-XX + MA1214-XX]
External house-side shield provides sharp
cutoff behind the pole and shields the lamp
from direct view. Mounted to the door frame
via double-sided VHB adhesive [TLM] or three
[3] stainless steel fasteners [TLL]. Rotatable in
90° increments, the external house-side shield
provides industry leading glare and spill light
control.
[Arm Mount] [WM]
[MS]