Filter
Top Products
22
9.5 User Menu Options
Enable/Disable (Fittings);
Enter the User Passcode.
The display shows;
Press &, the display shows;
Press & or %, the display shows;
Press % and $ to select the required fitting then press & to enable/disable it.
The display shows;
Repeat pressing % and $ if further fittings require enabling/disabling.
Press ' to exit the menu.
9.5.1 Enable / Disable All;
Enter the User Passcode.
The display will show;
Press &, the display shows;
Press % or $, the display shows;
Note: If Disable is selected, the disable LED illuminates and buzzer sounds once.
CODE ACCEPTED. 1:ENABLE/DISABLE
2:RESET 3:OTHERS 4:TEST 5:QUIT
1:ENABLE 2:DISABLE 3:DISABLE ALL
4:ENABLE ALL 5: QUIT
TO ENABLE/DISABLE FITTING ### (PRESS 1)
2:HUNDREDS 3:UNITS 4:UNITS 5:QUIT
FITTING ### IS ENABLED/DISABLED
2:HUNDREDS 3:TENS 4:UNITS 5:QUIT
CODE ACCEPTED. 1:ENABLE/DISABLE
2:RESET 3:OTHERS 4:TEST 5:QUIT
1:ENABLE/DISABLE 2:ENABLE ALL
3:DISABLE ALL 5:QUIT
ALL FITTINGS IN THE LOOP ARE ENABLED/DISABLED
EXIT (PRESS 5)