Filter
Top Products
9
SECURE FABRIC CAB SKIN TO FRAME (FIG. 9)
13. Find the large fabric strap sewn into the bottom rear
area of the fabric cab skin. Pull the strap down and
over the end of both mounting bar ends [C1, C2].
(Fig. 9) Find all rip and grip tabs on the inside of the
cab skin and secure the skin to the frame.
Note: If it is very difficult to secure straps over the
mounting bar ends, make sure that all rip and grip
tabs are loose and that the skin is fitted correctly.
SECURE POCKETS TO CAB SKIN AND FRAME
(FIG. 10)
14. Find the two sand/salt pouches [R1, R2] and the
mesh garage door opener holder [S]. Secure the
large pouches to the top arch of the mounting bar
ends using the rip and grip strips. On the left side
of the inside of the fabric skin there is a loose fabric
gusset. Secure the garage door opener holder to
the gusset with rip and grip strips. (Fig. 10)
Fig. 9
Fig. 10