Classic Accessories 08CH56_10159 Snow Blower Attachment User Manual


 
11
CARE AND MAINTENANCE
STORAGE
Store in a clean dry place. Never store a wet cover in an enclosed area as it can develop mildew.
Avoid folding the plastic windows of the cover for long periods.
BOLTS
Check all bolts before each use to see that they are tight. If one or more bolts come loose, failure of cab parts may occur.
WINDOWS
Don't clean the plastic windows when they are dry—you can scratch them.
Hose them with water and rub them with your bare hands. Liquid soap may be used.
During freezing weather an automotive windshield solvent and a soft cloth will work (don't use your bare hands with the solvent).
Fabric areas of the cab may be washed with a rag. Don't use soap as it may remove protective coatings added by the factory.
TROUBLESHOOTING
WARRANTY
The manufacturer, Classic Accessories, Inc., will repair or replace, without charge, this product which under normal usage has
proven to be defective in its manufacture or workmanship for a period of two (2) year from the date of initial retail purchase. This
warranty is valid only to the original purchaser. This warranty is not transferable and does not cover any parts that have been
subjectedtomisuse,abuse,alteration,overload,accidentornormalwearofmovingparts.
Service can be obtained by contacting Classic Accessories at 1-800-854-2315. Any cab or cab part that is returned to Classic
Accessories, together with the original sales receipt as proof of initial retail purchase, and with postage prepaid, will be repaired or
replaced without cost if the unit is found defective. This warranty does not apply to accessories or damage caused where repairs
have been made or attempted by others. All warranty work will be completed in a reasonable time, not to exceed 60 days after
receiving the product.
Classic Accessories is not responsible for direct, indirect, incidental or consequential damages. Some states do not allow
limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which
vary from State to State.
WARRANTY VOID IF PRODUCT USED FOR COMMERCIAL OR RENTAL PURPOSES OR IF THE DELUXE SNOW THROWER
CAB IS TRANSPORTED ON AN OPEN TRAILER OR TRUCK.
Call: 1-800-854-2315 for Warranty Assistance, Monday - Friday 8:00 a.m. - 4:00 p.m., PST
REPLACEMENT PARTS
If parts are missing or if you need replacement parts, please call Classic Accessories customer service at
1-800-854-2315, 8 a.m. - 4 p.m., PST, Monday-Friday. Please refer to the Package Contents List for the parts list.
Problem Possible Cause Corrective Action
Cab front interferes with the
snow thrower controls.
Upper horizontal mounting bar
[A, B1 & B2] is mounted too low.
1. Rotate cab forward.
2. Move cab sideways.
Not enough headroom.
Upper horizontal mounting bar
[A, B1 & B2] is mounted too low.
1. Rotate cab forward.
2. Raise attachment point