Filter
Top Products
6
INSTALL THE UPPER MOUNTING POSTS (FIG. 4)
4. Insert upper mounting posts [J1, J2] into lower mounting
posts as shown. (Fig. 4)
Do not tighten set screw at this time. See step 6.
INSTALL THE LOWER MOUNTING POSTS (FIG. 3)
3. Insert lower mounting posts [K1, K2] into mounting post
clamps as shown. Snug but do not fully tighten. Leave the
nutslooseforfinaladjustmentsofthemountingposts.
(Fig. 3)
Fig. 3
Fig. 4
J
K
P