Filter
Top Products
Page 13SKU 96405 For technical questions, please call 1-800-444-3353.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
General operating instructions
Turn the Power Switch of the tool to the “OFF” position and unplug the tool from
the electrical outlet before assembling or making any adjustments to the tool.
Maintain a proper grip on the Pole Saw whenever it is running. Hold the tool with
both hands. Always keep your left hand on the Front Handle (61) and your right
hand on the Rear Handle (74, 86), so that your body is to the left of the Pole Saw.
Never use a left-handed (cross-handed) grip or any stance which would place
your body or arm across the chain line.
Always wear the Shoulder Strap (66) to properly support the Pole Saw when
moving or using unit.
To activate the Saw, push the Safety Switch (72) forward and depress the Power
Switch (75).
Allow the Saw Chain to cut for you.
Exert only light downward pressure. If
you attempt to force the cut, damage
to the Guard Bar, Chain, or Motor can
result.
Do not use a back and forth sawing
type motion for cutting.
Release the Power Switch as soon
as the cut is completed. Running
the Pole Saw for long periods without a pause can cause unnecessary wear or
damage to the Guard Bar, Chain, and Motor.
Beware Kickback! Never cut with tip of blade.
Cut longer branches down in sections for greater efciency and safety.
(See example below.)
1.
2.
3.
4.
5.
6.
7.
8.
Safety Switch (72)
Power
Switch
(75)
Power
Cord
(88)
Safety Switch (72)
Power
Switch
(75)
Power
Cord
(88)