Filter
Top Products
Page 11SKU 96405 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 V~ / 60 Hz
Motor No Load Amperage 3.5<->4.0 AMPS
Blade 8” (Cutting Capacity = 6.7”)
Chain Speed 3149 Feet Per Minute
Chain Specs
Pitch: 3/8”
Gauge” 0.043”
Center Links 33
Oil Capacity 5.07 Ounces
Cord Information 17-5/8” L 18-AWG X 2C
Features
Built in Oiler
Pole Extends from 29” to 6’2”
Polarized Plug
Safety Trigger
Oregon
®
Chain
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Risk of accidental starting; resulting in serious personal
injury. Turn the Power Switch of the tool to its “OFF”
position and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
Assembly
Oil Requirements.
The Chain of the Pole Saw requires oil to function. The Oil Tank of the Pole Saw
must be kept full when in use, and drained before storage. Lubricate the Chain
with a high-quality chain saw oil before each use.
1.