Filter
Top Products
SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 15
To Start The Generator:
1. Turn the Fuel Valve (31) to its vertical
“OPEN” position.
(See Figure F.)
2. Move the Engine’s Choke all the way
to the left to its “START” position.
(See Figure F.)
3. Turn the Engine’s “ON/OFF” switch to
its “
ON” position. (See Figure G.)
4. Insert the Ignition Key into the Igni-
tion Switch (45), and turn the Ignition
Key to the right to start the Engine.
(See Figure H.)
5. Allow the Engine to run for several
seconds, then move the Engine’s
Choke all the way to the left to its
“RUN” position. (See Figure F.)
NOTE: DO NOT ATTEMPT TO ADJUST
THE ENGINE’S THROTTLE! This engine
uses a governor device to automatically
control the engine’s speed. If the throttle
is adjusted, it may result in decreased ef-
ficiency and/or damage to the unit.
120V DUAL OUTLET
(43)
OVERLOAD BREAKERS
(42)
IGNITION SWITCH
(45)
FIGURE H
120/240 V
TWISTLOCK OUTLET
(44)
GROUNDING POINT
FIGURE G
ON/OFF
Switch
FUEL VALVE (31)
Hidden from view
CHOKE
FIGURE F
REV 06/04; 08/04; 11/04