SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 11
INSTALLATION
1. NOTE: Prior to powering tools and equipment, make sure the Generator’s rated
voltage, wattage, and amperage capacity (120V/ 20 AMPs and 240V/ 20 AMPs) is
adequate to supply all electrical loads that the unit will power. If powering exceeds
the Generator’s capacity, it may be necessary to group one or more of the tools and/
or equipment for connection to a separate Generator.
2. Electrical and other permits may be required for the installation of emergency power
systems. Investigate the local building and electrical codes before installing this
unit. Installation must be completed by licensed contractors.
3. WARNING! The Generator weighs 155 pounds. Use care and the proper lifting
or hoisting equipment when moving it to the installation location. Always connect
hoist lines to the Frame (21) of the Generator.
11. Use only Class BC or Class ABC fire extinguishers on electrical fires.
12. WARNING! People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
REV 03/06