Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.SKU 66910
Table A shows the correct size to use 3.
depending on cord length and nameplate
ampere rating. If in doubt, use the next
heavier gauge. The smaller the gauge
number, the heavier the cord. To reduce
the risk of disconnection of appliance
cord from the extension cord during
operating:
a. Make a knot as shown in Method of
Securing Extension Cord; or
Use one of the plug-receptacle retaining b.
straps or connectors described in this
manual.
Ground Fault Circuit Interrupter (GFCI) 4.
protection should be provided on the
circuit(s) or outlet(s) to be used for the
gardening equipment. Receptacles are
available having built-in GFCI protection
and may be used for this measure of
safety.
Do not abuse the Cord - Do not carry 5.
appliance by cord or pull on it to
disconnect from receptacle. Keep the
cord from heat, oil, and sharp edges.
Use only three-wire outdoor extension
6.
cords that have three-prong grounding
plugs and grounding receptacles that
accept the appliance’s plug.
This Chipper Shredder should be
7.
grounded while in use to reduce the risk
of electric shock to the operator. The unit
is equipped with a 3-conductor cord and
grounding receptacle. The green or
green and yellow conductor in the cord is
the grounding wire. Do not connect the
green or green and yellow wire to a live
terminal.
Your unit has a plug as illustrated above.
The outlet used should look like the
outlet illustrated above. Do not remove
the grounding prong from the plug. If
the plug will not t the outlet, have a
proper outlet installed by a qualied
electrician.
To reduce the risk of electric shock, 8.
this appliance has a polarized plug
(one blade is wider than the other)
and will require the use of a polarized
into a polarized extension cord only one
extension cord, reverse the plug. If the
polarized extension cord. A polarized
extension cord will require the use of a
the polarized wall outlet only one way.
outlet, reverse the plug. If the plug still