Chicago Electric 66910 Chipper User Manual


 
Page 2 For technical questions, please call 1-800-444-3353. SKU 66910
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual (or month and year
of purchase if product has no number). Keep
this manual and the receipt in a safe and dry
place for future reference.
IMPORTANT SAFETY
INSTRUCTIONS
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
DANGER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
CAUTION, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
NOTICE is used to
address practices not
related to personal injury.
CAUTION, without the
safety alert symbol, is
used to address practices not
related to personal injury.
When using electric
gardening equipment,
basic safety precautions should
always be followed to reduce the
risk of re, electric shock, and
personal injury, including the
following:
READ ALL INSTRUCTIONS
Power Cord Safety
1. WARNING! - To reduce the
risk of electric shock, use
only with an extension cord
intended for outdoor use,
such as an extension cord of cord
type SW-A, SOW-A, STW-A, STOW-A,
SJW-A, SJOW-A, SJTW-A. or
SJTOW-A.
Extension Cord - Make sure your 2.
extension cord is in good condition.
When using an extension cord, be sure
to use one heavy enough to carry the
current your Chipper Shredder will draw.
An undersized extension cord will cause
a drop in line voltage resulting in loss of
power and overheating.
TABLE A – MINIMUM WIRE GAUGE
FOR EXTENSION CORDS (120 VOLT)
Ampere
Rating
(at full load)
EXTENSION CORD
LENGTH
25’ 50’ 100’ 150’
0 – 6 18 16 16 14
6 – 10 18 16 14 12
10 – 12 16 16 14 12
12 – 16 14 12 Not recommended