Filter
Top Products
AC Power Connection:
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
General Instructions
Please read carefully and thoroughly the contents of this manual before operating the Laser system.
These instructions contain important safety information regarding the use and maintenance of this
system. Please keep this manual for future reference.
• Every unit has been thoroughly tested and has been shipped in perfect operating condition.
• Check the shipping carton for damage that may have occurred during shipping.
• If the carton appears to be damaged carefully inspect your unit for any damage.
• Be sure all equipment necessary to operate the system gas arrived intact.
• In the event that damage has been found or parts are missing, please contact CHAUVET customer
support for further instructions.
• Please do not return the unit to your dealer without first contacting CHAUVET customer support.
Notice!
1) Please insure the power supply has good connect with ground before operating the unit in order
to prevent electrical shock.
2) This system is intended to only be operated indoors. Avoid any direct contact with water, and
make certain the unit is firmly mounted.
3) Ensure the operating temperature is within the specified normal range of 18~30
0
C.
4) Prolonged operation shortens the life of the laser device.
5) The system over a long period of time may build up dust and other contaminants on the scanner
optics and or the aperture window.
6) Do not remove any of the laser safety warning labels, manufacturing label, and warranty labels.
If the warranty labels are broken the warranty will be voided.
7) Please contact us if you experience any problems with this unit.
8) NO USER SERVICABLE PARTS INSIDE:
Warranty Void if Warranty Seals are missing or
appear tampered with.
9) Please do not discard the shipping materials. In the event you must return the unit please do so
in the original factory packaging to avoid further damage.
LRG-55 User Manual 7 11/14/2007/18:46