Chauvet LRG-55 Landscape Lighting User Manual


 
INTRODUCTION
You may notice that both the red and green beams coming out of the projector are larger than the
4.95mW projectors. There is a very distinct reason for this. Unlike 4.95mW projectors the output of
the CHAUVET laser projectors with Fatbeam™ technology inside outputs <20mW for each beam.
Normally outputs greater than 4.95mW require a variance from the FDA. This product has been
designed to meet a special classification of ClassIIIR. Under this classification with the Fatbeam™
technology the acceptable energy levels (AEL) have been met. Therefore the maximum potential
exposure to the unaided eye is less than 4.95mW for a static beam. Additionally the (MPE) or
Maximum Permissible Exposure with this product is below acceptable levels for human ocular or
tissue exposure.
Features
CONTROL FEATURES
8-channel DMX controlled green and red laser
41 Dynamic, 50 Static patterns, laser off & sound active mode
- Scan and speed adjustment yields 500 laser effects
- 44 patterns in sound active mode
- 48 patterns in auto mode
X and Y position adjustment of laser effect
- X moves lasers in opposite movements
- Y moves lasers in unison
Dynamic Scan speed adjust
Dynamic pattern speed adjust
Static pattern size adjust
Laser color selection; red, green or both red & green
FEATURES
Dual 10mW Fatbeam™ Laser
technology produces 10-14mm
beam which complies with IEC
Safety Standards under ClassIIIR
Operating modes; Auto, Sound
Active, Master/Slave & DMX
Safety cover for scanner mirrors
Sound sensitivity control
Sound activated via DMX
Scanning motors (micro stepping)
Rugged construction
Fan cooled
DMX Channel Summary
CHANNEL FUNCTION
1 Mode
2 Pattern Selection
3 X Position
4 Y Position
5 Scan speed
6 Dynamic Pattern select
7 Static Pattern size
8 Color
LRG-55 User Manual 5 11/14/2007/18:46