Filter
Top Products
Operation
-10- OVATION™ E-190WW User Manual Rev. 3
Menu Map
Main Level Programming Levels Description
DIM D.000–D.100
Selects the amount of light output (0–100%)
RUN
DMX
Receives DMX signals from the DMX controller
SLAV
Receives DMX signals from the master
ADDR
D.001–D.512
Sets the DMX starting address
SET
KEY
OFF
Sets to key lock (passcode mode)
ON
DIMX
OFF
Selects dimmer speeds from fast (DIM1) to
slow (DIM4) or OFF
DIM1
DIM2
DIM3
DIM4
CURV
OFF
Selects dimmer curves from small (CV1) to
large (CV3) or OFF
CV1
CV2
CV3
PERF
LIVE
Maintains LED cooling by balancing fan and
power output level
STDO
Maintains LED cooling by limiting power output
level
POWR
Maintains LED cooling by using fan and
allowing full power output
SLCK
OFF
Sets menu-level access lock
ON
PERS
UNO
1-channel DMX personality
DOS
2-channel DMX personality
STD.P
3-channel DMX personality
DERR
BLAK
Blacks out fixture upon loss of DMX signals
SAVE
Continues with last command upon loss of
DMX signals
REST
****
(Enter Passcode)
REST OK
Resets the fixture to factory defaults
MCON
SELF
No DMX signals are sent through DMX output
MAST
Sends DMX signals to OVATION™ E-190WW
slaves