Filter
Top Products
9
SS
SS
S
IEIE
IEIE
IE
NANA
NANA
NA
™™
™™
™
LIGHT KIT INSTALLATION
Light Assembly Installation
Step 11a. Connect the light assembly connector to the
motor connector, as shown.
Step 11b. Carefully tuck the wires and align the light
assembly with the adapter plate.
Step 11c. Screw the finial rod into the adapter plate to
secure.
Install Glass Shades
Step 12a. Remove the three lock rings from the light fixture
and set aside.
Step 12b. Slide the glass shade into the fixture and hold
firmly. Using the glass locking rings removed in Step 14a,
secure each piece of glass firmly to the light fixture.
Assure each piece of glass is firmly installed by rotating
the glass clockwise until it is no longer loose.
Install Incandescent Lightbulbs
Step 13a. Screw the three 60 Watt type A15 bulbs into
each socket.
NOTE: When replacing lightbulbs, be sure to use only
60-watt maximum.
LIGHT KIT HARDWARE (not to scale)
Light Kit
Downlight Lightbulbs (3)
60-watt A-15
Glass Shade
Finial Rod
Finial
Lock Ring