Filter
Top Products
7
SS
SS
S
IEIE
IEIE
IE
NANA
NANA
NA
™™
™™
™
Installation/Replacement of Incandescent Lightbulbs
Step 5. Remove the two screws from the cover door as
shown and lift door from motor. Install a 40-watt S-11
type incandescent lightbulb in the socket. Replace the door
and re-insert the screws. Repeat twice more.
NOTE: When replacing lightbulbs, be sure to use only
40-watt maximum.
BLADE INSTALLATION
Blades (5)
Allen Screw Pack C:
Blade Screws and Washers (16)
BLADE HARDWARE (not to scale)
Step 6a. Align the holes in the Siena® exclusive blade with
the holes in the bladeholder.
Step 6b. Using Screw Pack C and the Allen wrench
provided, install the Allen screws in the blade and
bladeholder as shown. Repeat for each additional blade.
CAUTION:
Blade screws must be tightened securely before
operating the fan.
NO LIGHT CAP OPTION
Note: If you are installing the accessory light fixture, skip
to Step 8a now.
Step 7a. Carefully tuck the light wires into the no light
cap, as shown.
Step 7b. Thread the no light cap into the adapter plate, as
shown.
Allen
Wrench
FAN PREPARATION (CONT.)