Filter
Top Products
20
Figure #4
Figure #3
WHITE
BEZEL
ALMOND
BEZEL
RUBBER KEY
PAD
RUBBER KEY
PAD
LOCATING
PINS (4)
LOCATING
PINS
HOLES(4)
W-84 Wall Control Bezel replacement: -
CONTINUED
Step 1c. Locate the rubber key pad attached to the
four (4) locating pins and remove rubber key pad
from the WHITE bezel, also as shown in Figure #3.
Step 1d. Reinstall the rubber key pad on to the
four (4) locating pins located on the almond bezel
as shown in Figure #4.
Step 1e. Before attaching the bezel back onto the
front of the switch, make sure that the rubber key
pad is attached to the locating pins on the bezel as
shown in Figure #5.
RUBBER KEY
PAD
ALMOND
BEZEL
Figure #5
LOCATING
PINS
(4)